Ide Devices - Kontron PCI-946-1 Technical Reference Manual

2.7.2. IDE Devices

Two IDE interfaces are provided to support up to four IDE devices, such as hard disks,
CD-ROM, and ZIP drives. The interfaces are referred to as Primary (J5 connector) and
Secondary (J9 connector). Connections are supported through 40-pin dual row headers.
Related Jumpers
BIOS Settings
To connect one IDE interface, use a 40-pin flat ribbon cable. An 18 inches length cable is
available from Kontron: part number 150-259.
The cable is illustrated below:
Downloaded from StockCheck.com
None
To detect a hard disk drive type, refer to Section 4.1.4: AWARD CMOS Setup Utility,
Standard CMOS Setup option
To enable/disable the system to boot from the floppy disk, refer to Section 4.1.5:
AWARD CMOS Setup Utility, BIOS Feature Setup option
2-13
Onboard Features