2.6.
The board provides a dual-USB interface through the J10 10-pin header. To connect
standard USB devices, a USB cable/bracket assembly is required. It is available from
Kontron: part number 150-316-00.
Related Jumpers
BIOS Settings
The USB cable/bracket assembly is described as follows:
Downloaded from StockCheck.com
USB PORTS
None
If required USB keyboard support for DOS and BIOS can be activated at the BIOS
level.
Refer to Section 4.1.10: AWARD CMOS Setup Utility, Integrated Peripherals Setup
option
2-11
Onboard Features