Table of Contents
Advertisement
4.2.2. Setups
The arrow keys (↑ ↓ → ←) are used to highlight items on the menu and the PAGEUP and
PAGEDOWN keys are used to change the entry values for the highlighted item. To enter in
a submenu, press the ENTER key. Also, you can press the F1 key to obtain help
information or the ESC key to close a menu or to quit the program.
PAGEDOWN or -
Downloaded from StockCheck.com
Key
↑ ↑ ↑ ↑
Moves to previous item.
↓ ↓ ↓ ↓
Moves to next item.
← ← ← ←
Moves to the item a the left.
→ → → →
Moves to the item at the right.
ESC
When in the Main Menu: Quits program (Answer 'Y' to save changes into CMOS).
When in other screens: Exits and returns to the Main Menu.
PAGEUP or +
Increases the numeric value or changes value.
Decreases the numeric value or changes value.
F1
Help Menu
F2 / <Shift>F2
At the main menu, change the color of the menu.
F5
When in the Main Menu: Restores the previous setup values for all the BIOS parameters
(except Standard CMOS Setup) which were displayed when you entered the program.
When in BIOS Features Setup, Chipset Features Setup, Power Management Setup, PNP/PCI
Setup, Integrated Peripherals Setup or CPU Board Features: Restores the previous setup
values for that setup screen only.
F6
When in the Main Menu: Loads the BIOS Defaults of all the BIOS parameters (except
Standard CMOS Setup). The BIOS Defaults are fail safe settings, which consists of the safest
set of parameters.
When in BIOS Features Setup, Chipset Features Setup, Power Management Setup, PNP/PCI
Setup, Integrated Peripherals Setup or CPU Board Features: Loads the BIOS Defaults for all
the BIOS parameters for that setup screen only.
F7
When in the Main Menu: Loads the Setup Defaults for all the BIOS parameters (except
Standard CMOS Setup).
When in BIOS Features Setup, Chipset Features Setup, Power Management Setup, PNP/PCI
Setup, Integrated Peripherals Setup or CPU Board Features: Loads the Setup Defaults for the
BIOS parameters for that setup screen only. If the CMOS RAM is corrupted, the Setup defaults
are loaded automatically.
F10
When in the Main Menu: Saves all the CMOS changes and exit.
Function
4-5
Advertisement
Table of Contents
