Standard Cmos Setups - Kontron PCI-946-1 Technical Reference Manual

PCI-946-1 and P3S440BX Technical Reference manual

4.2.3. Standard CMOS Setups

Date/Time
Hard Disks
Drive A / Drive B
Video
Halt on
Memory
Downloaded from StockCheck.com
Function
The current values for each category are displayed. Enter new values through the
keyboard.
Two IDE controllers are defined on the PCI-946-1 and P3S440BX boards. The Primary
and Secondary controllers can both have two disks: Master Disk or Slave Disk.
Only three settings are available for the hard disk type: Auto, User and None. Type 1
to 46 are not predefined in the system: Use auto or enter the parameters for the type
in the user-defined.
Select the type of floppy disk installed for drive A and drive B.
This option specifies the basic type of display adapter card installed in the system.
This option specifies the type of errors that will stop the system during the BIOS
booting procedure. A message asks that you press F1 to continue or press the
DELETE key to enter Setup. The settings are: All errors, No errors, All but keyboard,
All but diskette, and All but disk/key (default setting).
This display-only option indicates the amount of Base, Extended and other types of
memory installed in the system.
Description
4-6