Table of Contents
Advertisement
BIOS UPGRADE & AUTOMATIC CPLD HARDWARE UPGRADE
During the first system boot up after you update the Boot Block Flash BIOS
with the UPGBIOS utility, the BIOS may need to upgrade the CPLD
devices. In such a case, do not interrupt the system in any way (power
down, reset, mouse or keyboard functions). The devices will be
damaged and your board rendered inoperative if you disturb the CPLD
hardware upgrade process!
If your device upgrade was successful, the following message is displayed
under the "Status:" line prior to rebooting:
Update complete successfully, wait for the automatic reboot.
Rebooting in 5 second(s).
If the update is not successful, the following message appears under the
"Status:" line:
ERROR: general failure programming CPLDs!
Please contact Kontron's technical support.
You must contact Kontron's technical support for further instructions.
ADAPTER CABLES
While adapter cables are provided from various sources, the pinout is often
different. The direct crimp design offered by Kontron allows the simplest
cable assembly. All cables are available from Kontron Sales Department.
Downloaded from StockCheck.com
Advertisement
Table of Contents
