Table of Contents
Advertisement
2.4.
The Parallel Port is available through the J12 26-pin connector. It is bi-directional and
supports the Standard, EPP and ECP operating modes.
Related Jumpers
BIOS Settings
The usual way to use the parallel port is to issue signals from the J12 26-pin connector to a
standard 25-pin D-Sub connector using an adapter cable. Such a cable is available from
Kontron (Part Number: 150-172).
Downloaded from StockCheck.com
PARALLEL PORT
None
To setup the Parallel Port, refer to Section 4.1.10: AWARD CMOS Setup Utility,
Integrated Peripherals option
2-7
Onboard Features
Advertisement
Table of Contents
