Table of Contents
Advertisement
UNPACKING AND SAFETY PRECAUTIONS
STATIC ELECTRICITY
Since static electricity can cause damage to electronic devices, the following precautions
should be taken:
1.
2.
3.
Storage Environment
Electronic boards are sensitive devices. Do not handle or store devices near strong
electrostatic, electromagnetic, magnetic or radioactive fields.
Power Supply
Before any installation or setup, ensure that the board is unplugged from power sources or
subsystems.
Unpacking
Follow these recommendations while unpacking:
1.
2.
3.
When unpacking you will find:
1.
2.
Downloaded from StockCheck.com
Keep the board in its anti-static package, until you are ready to install it.
Touch a grounded surface or wear a grounding wrist strap before removing the board
from its package; this will discharge any static electricity that may have built up in
your body.
Handle the board by the edges.
After opening the box, save it and the packing material for possible future shipment.
Remove the board from its anti-static wrapping and place it on a grounded surface.
Inspect the board for damage. If there is any damage or missing items, notify Kontron
immediately.
One PCI-946-1 or P3S440BX Single Board Computer.
One CDROM containing drivers.
Advertisement
Table of Contents
