Table of Contents
Advertisement
2.1. SYSTEM CORE
2.1.1. Processors
The following processors can be installed on the PCI-946-1:
PPGA Celeron Processors running at 300, 366, 433, MHz and future processors as
technology evolves.
The Celeron Processor and its cooling fan assembly are factory installed and the speed of
the processor is preset to its nominal value (maximum internal speed).
The following processors can be installed on the P3S440BX:
FC-PGA Pentium® III Processors running from 600 to 750 MHz and future processors as
technology evolves.
The Pentium® III processor and its cooling fan assembly are factory installed and the
speed of the processor is preset to its nominal value (maximum internal speed).
BIOS Setups
The processor must be mounted to the board using the J22 socket. A fan connector referred to
as J24 provides the power voltage for the CPU fan assembly.
Downloaded from StockCheck.com
See Section 6-13: AWARD Setup Program, CPU/Board Features Setup option
NOTE
Celeron processors have fixed built-in multipliers and cannot be changed.
2-1
Onboard Features
Advertisement
Table of Contents
