Kontron PCI-946-1 Technical Reference Manual page 77

PCI-946-1 and P3S440BX Technical Reference manual
Power Management Setup (Continued)
Resume by Ring
IRQ 8 Break Suspend
Resume by Alarm
IRQ[3-7,9-15], NMI
Primary IDE 0
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
Floppy Disk
Serial Port
Parallel Port
Downloaded from StockCheck.com
BIOS Setup
Option
Defaults Defaults
Dis. En.
Dis. En.
Dis. Dis.
Reload Global Timer Events:
Dis. En.
Dis. En.
Dis. En.
Dis. En.
Dis. En.
Dis. En.
En. En.
Dis. En.
Possible
Settings
En./Dis. When Enabled and a modem is connected to a serial port, allows a
modem ring to re-activate the CPU when in Suspend mode.
En./Dis. When Enabled, the RTC alarm interrupt is monitored to allow an
interrupt to awaken the system when in Doze, Standby or Suspend
Mode.
En./Dis. When Enabled, allows setup of a time to re-activate the CPU when in
Suspend mode with the options Date (of Month) Alarm and Time
(hh:mm:ss) Alarm.
Note: The IRQ 8 Break Suspend option in this setup screen must
be Enabled to use the RTC alarm.
En./Dis.
En./Dis.
En./Dis.
When any of the options below is Enabled, monitoring of the interrupt
En./Dis.
will occur to allow an interrupt to awaken the system when in Doze,
En./Dis.
Standby or Suspend Mode.
En./Dis.
En./Dis.
En./Dis.
4-12
Description