Table of Contents
Advertisement
PCI-946-1 and P3S440BX Technical Reference manual
4.2 ACCESSING THE BIOS SETUP PROGRAM
The system BIOS (Basic Input Output System) provides an interface between the operating
system and the hardware of the PCI-946-1 and P3S440BX peripheral processor. The PCI-
946-1 AND P3S440BX uses the AWARD Setup program, a setup utility in flash memory
that is accessed by pressing the DELETE key at the appropriate time during system boot.
This utility is used to set configuration data in CMOS RAM.
To run the AWARD Setup program incorporated in the ROM BIOS:
STANDARD CMOS SETUP
BIOS FEATURES SETUP
CHIPSET FEATURES SETUP
POWER MANAGEMENT SETUP
PNP/PCI CONFIGURATION
CPU/BOARD FEATURES SETUP
INTEGRATED PERIPHERALS
Esc
F10
Downloaded from StockCheck.com
CAUTION
Before modifying CMOS setup parameters, ensure that the W4 battery
selection jumper is installed to enable the CMOS battery back up (please refer
to Section 3.1).
•
Turn on or reboot the system.
•
Hit the DELETE key when the message - "Press DEL to Enter SETUP" appears
near the bottom of the screen.
The main menu of the AWARD BIOS CMOS Setup Utility appears on the screen.
KONTRON T1005 BIOS VERSION 2.0
AWARD SOFTWARE, INC. (2A69TU00)
:
Quit
:
Save & Exit Setup
Time, Date, Hard Disk Type . . .
CMOS SETUP UTILITY
LOAD BIOS DEFAULTS
LOAD SETUP DEFAULTS
SUPERVISOR PASSWORD
USER PASSWORD
IDE HDD AUTO DETECTION
SAVE & EXIT SETUP
EXIT WITHOUT SAVING
↑ ↓ → ←
(Shift)F2
4-2
:
Select Item
:
Change Color
Advertisement
Table of Contents
