Ps/2 Mouse; Parallel Port - Kontron ETXexpress-WPM User Manual

PS/2 Mouse

The ETXexpress Carrier Board BIOS provides support for a PS/2 mouse.
Configuration
The mouse uses I/O and IRQ resources. The BIOS allocates the resources during
POST configuration. The resources are set to be compatible with common PC/AT
settings.
You can configure support for the PS/2 mouse from the BIOS Setup Utility. (Press the
Delete button during reboot to see the BIOS Setup Utility.)
Go to the Boot Menu Settings Menu or the Boot Settings Configuration Submenu.
For complete information on BIOS setup options, see the BIOS Operation section in the
back of this manual.

Parallel Port

The ETXexpress Carrier Board BIOS provides support for one high-speed bi-directional
SPP/EPP/ECP parallel port. The parallel-communication interface shares signals with
the floppy-disk interface.
Configuration
The parallel-communication interface uses I/O, IRQ, and DMA resources. The
resources are allocated by the BIOS during POST configuration and are compatible with
common PC/AT settings.
You can configure support for the Parallel Port from the BIOS Setup Utility. (Press the
Delete button during reboot to see the BIOS Setup Utility.)
Go to the Advanced Menu->Super I/O Configuration Submenu.
For complete information on BIOS setup options, see the BIOS Operation section in the
back of this manual.
ETXexpress-WPM User's Guide page 43