Table of Contents
Advertisement
2.5.
PS/2 KEYBOARD / PS/2 MOUSE INTERFACE
The onboard keyboard controller is 8042 software compatible. PS/2 Keyboard and mouse
signals are available through an output that supports direct connection to the interface.
Since signals of both devices are combined on the same connector, a Y-cable is required to
split the signals and feed a standard AT keyboard and a PS/2 mouse.
Signal Path
PS/2 keyboard and PS/2 mouse signals are available through J5 CPCI I/O connector
and J14 Mezzanine connector.
Related Jumpers
None.
BIOS Settings
11.3.7 Integrated Peripherals : USB Keyboard Support; PS/2 Mouse Function Control
2.6.
PARALLEL PORT
The cPCI-MXS64GX features one multi-mode parallel port. It is compatible with Standard
Mode IBM PC/XT, PC/AT, and PS/2 compatible bi-directional parallel port, Enhanced
Parallel Port (EPP), and Enhanced Capabilities Port (ECP).
Signal Path
The Parallel Port interface is only available through J5 CPCI I/O connector.
Related Jumpers
None
BIOS Settings
Section 4.1.11 Integrated Peripherals: Onboard Parallel Port; Parallel Port Mode
2.5
Onboard Features
Advertisement
Table of Contents
