MAINTENANCE AND TROUBLESHOOTING
System and Error Messages
System and error messages appear on the fourth line of the display at
three-second intervals until the condition is corrected or has ended. If
there is more than one message, the messages will alternate on the display
at three-second intervals. These system and error messages are listed in
this appendix alphabetically.
NOTE
The operations in this chapter should be performed only by qualified
service personnel with a knowledge of electrical safety techniques.
Never service the analyzer unless power has been disconnected.
System or error messages will not appear on the display when you are
using the analyzer keys to access menu functions.
Error Messages & Troubleshooting
|
6-1