Setup Key
4-2 | Dycor CG1000-RTP Oxygen Analyzer
Setup Key Menu
display
Passwords
set Pressure
system Tests
system serial #
Thermal calibration
carrier gas
communications
Display
Define what information should appear on the top three display lines of
your analyzer display.
•
O
2
•
Cell temperature
•
Cell millivolts
•
Thermocouple millivolts (T/C millivolts)
•
Current date/time
•
User text
•
Turn off (leave display line blank)
•
Flow
Sometimes menu options can occupy Display Lines 3 and 4, and even
Display Line 2. Therefore, put the information that is most critical to
view on Display Line 1 and 2.
NOTE
Function/Options
select info for display lines 1, 2 and 3
create a system password
Define Process Pressure value
Perform internal diagnostics
view serial number and manufacturing num-
ber
Perform a primary calibration. A primary cali-
bration is intended to extend the life of your
sensor. do not perform this type of calibration
unless specifically instructed to do so
Define which carrier gas is used to deliver your
calibration gases. This option also calibrates
your flow sensor.
Define communication parameters