Table of Contents
Advertisement
3-12 | Dycor CG1000-RTP Oxygen Analyzer
Keypad Keys
Keypad Key
setup
calibrate
Alarm
Analog Range
Help
cancel
Enter
Selecting Menu Options
To select a menu option, press the Down arrow key ↓ until the arrow
pointers are pointing at the menu option, then press ENTER. if you are
in a menu and with a list of choices, the currently selected choice will
have an asterisk (*) in front of it.
For example:
If you select the Display option from the Setup key, then select Display
Line 1, the current choice to appear on Display Line 1 will appear with the
asterisk in front of it (for example, % oxygen).
If all menu options can't be shown on the display, a Down arrow key
appears on the far right of the last display line to indicate that more menu
options are available. When the Down arrow key disappears, there are no
more menu options below the bottom menu item on the display. If an Up
↑
arrow key
appears on the far right of the first display line, it indicates
that there are more menu options available by pressing the Up arrow key.
Exiting Menu Options
To cancel out of a specific menu, press Cancel. To cancel out of all menus,
continue to press Cancel until all menus disappear from the display and
only process readings remain.
Pressing Cancel does not delete any settings you have set while in
that menu.
NOTE
Function
Set the analyzer for your specific application.
set calibration parameters and start calibrations.
Define parameters that control the alarm relays.
Define parameters that control analog current outputs.
Access control unit on-line help.
Exit menu options.
Confirm menu choices and values.
↓
Advertisement
Table of Contents
Troubleshooting
