Chapter 6 Diagnostic Checks And Troubleshooting; Diagnostics Checks - Ametek Dycor CG1100 Series User Manual

DIAGNOSTIC CHECkS AND TROUBLESHOOTING

Diagnostics Checks


NOTE
Diagnostic checks are broken down as follows:
• Wiring Connections
• Thermocouple Checks
• Calibration Setup Check
•
DC Power Checks
•
Furnace Checks
•
Cell Checks
• Leak Check
•
24-Volt Converter
We recommend that the temperature, pressure, oxygen reading and
flow be recorded as a troubleshooting aid. This information will be
helpful should you need to contact the factory for assistance. Be sure
to always include your analyzer model and serial number when call-
ing the factory for technical support.
Exercise care when working on the CG1102. Disconnect power
source, allow the unit to cool, and wear gloves.
Maintenance and Troubleshooting | 6-1