Chapter 5 Calibrate Key; Overview - Ametek Dycor CG1000-RTP User Manual

Overview

Calibrate Key
initiate cal
initiate verify
cal/verify data
cal gas values
Configure Verify
set clock

NOTE
CALIBRATE KEY
Function/Options
start a calibration
start a verify
view previously collected calibration or verify data
Enter calibration gas values to match known values of
calibration gas cylinders
Enter verify gas value
Enter acceptable verify range
set the current date and time
set calibration recovery times
All oxygen alarms are disabled during calibrations or verifications,
as well as during the recovery time after a calibration or verification.
Use the Analog Range key to set whether analog outputs should fol-
low the calibration reading or hold at the last process reading.
|
Calibration 5-1