Set Clock; Set Time And Date - Ametek Dycor CG1000-RTP User Manual

Set Clock

Set current time and date and define a recovery time.
The analyzer uses military
time so 16:00 equals 4:00 PM.,
and 04:00 equals 4:00 AM.

Set Time and Date

Set the date or time for the analyzer's internal clock.
1. From the Calibrate key menu, select Set Clock.
2. Select Set Time & Date from the Set Clock menu option.
3. Enter the new time, and press ENTER.
As you type the new time, it overwrites the Hr: Mn text. If the current
time is correct, press the ENTER key without changing the value.
Enter the correct date:
4. Enter the month, the day, the year, then press ENTER. If the current
date is correct, press ENTER without changing the value.
The time is: YY:XX
Enter new time: HR: Mn
The date is: YY/XX/ZZ
Enter date: Mo/Da/Yr
|
Calibration 5-11