Setting Up The Display - Ametek Dycor CG1000-RTP User Manual

Setting Up the Display

1. From the Setup menu, select Display.
2. Select Display Line #1, Display Line #2, or Display Line #3.
3. Select the type of information you want to place on the display line.
Entering user text
User text can be up to 20 characters long. The Down Arrow Key on Display Line
3 allows you to see where you are entering the user-text message. When you first
select User Text, the Down Arrow Key appears above the first position.
To enter text, use the Up and Down Arrow keys on the keypad to scroll
through the ASCII text characters. Once the letter you want appears, press
the Right Arrow Key to move to the next position. You can also press the
Left Arrow Key to move back one position in your text message. When
you are finished entering your message, press ENTER.
Use these keys to quickly move to a location in the ASCII text table:
Auto ranging feature for oxygen readings
If you select to display oxygen on one of the display lines and the oxygen
reading falls below 0.5% O
the PPM scale.
Number Key Character
0 0 (zero)
1 A
3 Z
5 space
7 a
9 z
, the display switches from the percent scale to
2
Controller / User Interface
|
4-3