Table of Contents
Advertisement
2.10 $AA5
Description:
Reads the reset status of a module.
Syntax:
$AA5 [CHKSUM](CR)
$
Delimiter character
AA
Address of the module to be set (00 to FF)
5
Command to read the module reset status.
Response:
Valid Command:
Invalid Command: ?AA[CHKSUM](CR)
!
Delimiter for a valid command.
?
Delimiter for an invalid command.
AA
Address of the responding module (00 to FF)
S
Reset status of the module
1：This is the first time the command has
been sent since the module was powered on.
0：This is not the first time the command
has been sent since the module was
powered on, which denotes that there has
been no module reset since the last $AA5
command was sent.
M-7065 User's Manual Ver2.0, Dec. /200 8 ---43
!AAS[CHKSUM](CR)
Advertisement
Table of Contents
