Table of Contents
Advertisement
MCO25plus Operating Instructions
8.1.1
Cleaning the Unit
All external surfaces of the unit, including the front panel, may be cleaned with common non-
alcoholic cleaning agents.
Attention!
Be sure that no liquid will enter the system in places where the unit has openings
(cooling slots; arm and scanner connectors). Never use sprays for cleaning!
The outer surfaces of the unit may be disinfected with any disinfectant commonly used in
operating rooms. Before using the system again after such cleaning, verify that no disinfectant
residues are present on the unit.
8.1.2
Cleaning the Focusing Handpieces
Fig. 8.1
Disassembled focusing handpieces
A
B
C
1
2
3
Cleaning options
Disinfecting solution
Steam sterilization, 134°C (273°F)
Gas sterilization
Plasma sterilization
Table 8.2
Processing options for focusing handpiece component
V 4.1
Focusing handpiece, 50 mm,
Focusing handpiece, 127 mm,
Focusing handpiece, 200 mm,
Attachment tip
Tube
Optics
Component 1 –
item no. 76-100-05
item no. 76-100-10
item no. 76-100-15
Component 2 –
tip
tube
Component 3 –
optics
no
no
75
Advertisement
Table of Contents
