Table of Contents
Advertisement
6.6.4
Scanner Operating Modes (C1...C4)
If you work with a scanner, the laser output power can be uniformly distributed across a
defined area. The shape of this area can be selected with the "C" buttons (see Fig. 6.7) and
the chosen pattern can be rotated as desired by pushing the respective button repeatedly. The
selected scanning pattern is indicated on the screen for user information.
Each scanning pattern can be combined with the Cycle function (F5, Fig. 5.8).
Indication: The appropriate button (C1...C4) lights up and the corresponding symbol appears
in the upper left corner of the LCD screen. At the same time, the red pilot laser marks the
selected pattern constantly in the focal plane of the scanner handpiece. When using the cycle
function, the CYCLE button (F5) lights up in addition.
6.6.5
Line Scan (C5)
The C5 function button (Fig. 6.7) allows line-type scanning, which is especially useful for
surgical applications of the scanner.
Fig. 6.8
Line scan using the curved line
D1
D3
D5
D7
C5
56
Maximum power
Scanning speed
"Center" function
Energy density: HIGH
"Line scan" function key
MCO25plus Operating Instructions
D2
Line length
D4
Application handpiece
D6
Pilot laser brightness/intensity
D8
Line type and rotational position
V 4.1
Advertisement
Table of Contents
