Table of Contents
Advertisement
MCO25plus Operating Instructions
Fig. 6.16 Entering a name for the memory
location
D7
Selection field for entering the name
character by character
F1, F5,
P2, P3
Buttons for navigating the cursor
in the D7 field
P1
Confirms/selects a character
S1
Deletes a character
D8
Indicates the memory location and
the entered text
Fig. 6.16 shows the input field for memory location names. After entering the name, select
"STORE" (Fig. 6.17), then press P1 (SELECT) for confirmation. This saves both the name and
the parameter settings in the selected memory location (here: M1).
In this process, the pilot laser intensity level is stored in addition to the following parameters:
laser output power, operating mode, pulse lengths and pause times, pulse rates/frequencies,
type of handpiece, scanning pattern, scanning speed and cycle values.
Please note!
When changing the operating mode (Time Mode to Frequency Mode or vice
versa), the stored parameters are lost, but the memory location names can be
retained.
V 4.1
Fig. 6.17 Storing the name and associated
parameters in the system's memory
P1
"Save" button
67
Advertisement
Table of Contents
