Table of Contents
Advertisement
5.5
Control Button Explanation
No. Designation
Laser
L1
activation
indicator
S1
STANDBY
S2
Pilot
"LASER
S3
READY"
SELECT
P1
(laser para-
meters)
P2
Reduce
P3
Increase
P2/
Rotate
P3
M1
Memory 1
M2
Memory 2
M3
Memory 3
M4
Memory 4
M5
Memory 5
Table 5.1
Control keys available on operator panel
38
Function
Indicator lights up as soon as
radiation is emitted
Pressing this button switches unit to
safe operating condition; unit
inoperable; no power output
(irradiation) possible
Pressing this button switches pilot
(aiming) beam on/off
Activation (emission of laser
radiation) now possible by operating
the footswitch
Pressing this button allows cyclical
(downward) selection of the
parameters displayed on the LCD
Pressing this button (or keeping it
pressed) allows incremental decrease
of the parameter selected
Pressing this button (or keeping it
pressed) allows incremental increase
of the parameter selected
Rotates the "straight line" or "curved
line" scanning pattern in small
increments
These functions allow access to, and
retrieval of, the parameters
(programs) stored in the system's
memory. However, pressing the
respective button for more than 5
seconds stores the currently used
settings and an acoustic signal is
emitted for confirmation.
MCO25plus Operating Instructions
Explanation
Functional signal and laser
warning light; yellow
Standard mode after switching
on the unit; green light
Indicates operating mode of
pilot laser; on or off; yellow
light
Yellow button backlight on;
flashes alternatingly with S1 if
a power check is being carried
out
The selected item is displayed
inversely (highlighted)
Short touch means single-step
reduction (1 increment);
keeping button pressed means
continuous, repetitive reduction
Short touch: one-increment
change;
keeping button pressed:
continuous, repetitive increase
Fine-rotation of the selected
scanning pattern
Memory buttons
Call up: short touch
Store: hold button down
V 4.1
Advertisement
Table of Contents
