Table of Contents
Advertisement
TD20 Series VFD
1. The optional EMC filter is selected according to the options and installed as specified in the EMC filter
manual.
2. The motor and control cables are selected as specified in this manual.
3. The VFD is installed according to the instructions given in this manual.
•
In a domestic environment, this product may cause radio inference, in which
case supplementary mitigation measures may be required.
A.3.2 Category C3
The immunity performance of the VFD complies with the demands of IEC/EN 61800-3, second
environment.
The emission limits are complied with the following provisions:
1. The optional EMC filter is selected according to the options and installed as specified in the EMC filter
manual.
2. The motor and control cables are selected as specified in this manual.
3. The VFD is installed according to the instructions given in this manual.
•
An VFD of category C3 is not intended to be used on a low-voltage public
civil power grid. Radio frequency interference is expected if the VFD is used
on such a network.
-116-
Appendix A Technical Data
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TD20 Series and is the answer not in the manual?