Assembling The Base With The Column Unit - Vatech PaX-i Insight Installation Manual

Assembling the Base with the Column Unit

4.2
1. Hang the base unit onto two bolts temporarily as shown below.
PaX-i Plus / Insight (Model: PCH-30CS) Installation Manual
4. Installing the Equipment: Base Stand (Optional)
If the installation site is a concrete floor, go to section 4.5
Fixing the base (Optional) and do number 1 first, after that
turn back 4.2 Assembling the Base with the Column Unit.
An installer should hold the base unit to keep it from falling.
39