Vatech PaX-i Insight Installation Manual page 122

9. Installing Software
Initiating the Imaging Program
Click the Acquisition tab. The imaging mode selection menu appears in the left
1.
pane (see below).
Select an imaging mode from the menu. Based on your selection, the console
2.
software window appears.
Proceed to the section 9.5.2 Setting Console Software.
3.
112
The imaging mode selection menu may differ due to your
equipment's option (CEPH or non-CEPH) or the Display
option you selected in the setting menu.
If the equipment is still in packing mode, the error code E001
appears. Go to 9.5.2 Setting Console Software > Disabling
the Packing Mode to disable packing mode.
PaX-i Plus / Insight (Model: PCH-30CS) Installation Manual