3. Before Installing the System
Before Installing the System
3.
Required Tools
3.1
The following tools are necessary to install the PaX-i Plus / Insight.
Item
Wrench Set
T-shaped Hex
Wrench
Hex Wrench w/
Handle
Ratchet Wrench
Needle-nose Pliers
Monkey Wrench
Spanner Wrench
20
Before or during the system installation, make sure that you
use the checklist No.3 through No.6 in the Appendix F.
Installation Checklist.
Figure
PaX-i Plus / Insight (Model: PCH-30CS) Installation Manual
Size
1.5 mm -10 mm
(0.06" - 0.4")
6 mm - 10 mm
(0.24" - 0.4")
6 mm - 10 mm
(0.24" - 0.4")
Tips: 3 mm - 8 mm
(0.12" - 0.3")
Regular
n/a
n/a