Vatech PaX-i Insight Installation Manual page 77

Drilling the Floor
Remove the aligning plate.
1.
Drill the floor holes (size: 10.5 x 30 mm) by using the concrete hammer drill.
2.
Remove the debris and clean the holes with the dust pump.
3.
Put the Ficher strong anchor bolts into the holes and attach them with the
4.
hammer. Verify that the Ficher strong anchor s are secured.
Ficher Strong Anchor
Hammer Drill
PaX-i Plus / Insight (Model: PCH-30CS) Installation Manual
5. Installing the Equipment: Wall Mount
M10 x 40
(Part No. 34)
L = 200 mm (7.9")
67