Installing The Switch Holders - Vatech PaX-i Insight Installation Manual

6. Completing Miscellaneous Works

Installing the Switch Holders

6.3
Up / Down
Switch Holder
Up / Down
Switch
Exposure
Switch Holder
Double-Sided
Sticker
Screws
Up / Down Switch Holder
Peel out the papers on the double-sided sticker.
1.
Attach the switch support to a suitable height on the left of the column.
2.
Exposure Switch Holder
Locate the Exposure Switch Holder with a sticker and three screws.
1.
Install the Exposure Switch Holder on the wall at the appropriate height using
2.
three screws.
Up / Down Switch
When the installation of the Up/Down switch is completed, connect it to the following
location.
78
(Part No. 2)
Optional
(Part No. 2)
(Part No. 2)
(Part No. 2)
M3X16
(Part No. 2)
PaX-i Plus / Insight (Model: PCH-30CS) Installation Manual