Leveling The Equipment - Vatech PaX-i Insight Installation Manual

Leveling the Equipment

4.9
T-shaped Hex
Wench
Spirit Level
Prepare the Spirit Level.
1.
Turn the Rotating Unit clockwise so that the X-ray tube head faces the front as
2.
shown in the figure.
Remove the case column front.
3.
Turn all screws on the base plate unit clockwise until they touch the ground.
4.
PaX-i Plus / Insight (Model: PCH-30CS) Installation Manual
4. Installing the Equipment: Base Stand (Optional)
8 mm / 0.3"
n/a
Ensure that the Spirit Level should rest only on the
locations indicated in the following figures to obtain the
accurate center.
57