Table of Contents
Advertisement
4. Installing the Equipment: Base Stand (Optional)
4.6
Removing the Transportation Safety Bolts
1.
Lift the Vertical Frame Unit Cover, as shown in the figure.
2.
Remove two Safety Bolts (see important) along with their tags.
Required Tool
62
Allen Wrench
Avoid damaging the cables when you are removing
the safety bolts.
the Safety Bolts are located inside the Vertical
Frame Unite, as indicated in the image below.
1
vatech A9 (Model:PHT-30CSS)
6 mm / 0.24"
Installation Manual
2
Advertisement
Table of Contents
