Table of Contents
Advertisement
9.5.4
Initiating the Imaging Program
1.
Click the ACQUISITION tab. The imaging mode selection buttons appear.
2.
Select the imaging mode. Then, the main GUI in the selected imaging mode
appears.
3.
Proceed to section 9.5.5 Configuring the Parameters.
vatech A9 (Model: PHT-30CSS)
The imaging mode selection buttons in the left menu may
appear differently, depending on the equipment's capacity
for acquiring images.
The error code E033 indicates that the equipment is still
in packing mode. It should disappear after the command
for disabling the packing mode has been executed. For
details, refer to 'Disabling the Packing Mode' on page
136.
Installation Manual
9. Installing Software
123
Advertisement
Table of Contents
Need help?
Do you have a question about the PHT-30CSS and is the answer not in the manual?
Questions and answers