Installing The Warning Lamp And Door Interlock Switch; Installing The Emergency Stop Switch - Vatech PHT-30CSS Installation Manual

2. Choosing an Installation Site
2.7

Installing the Warning Lamp and Door Interlock Switch

Refer to Appendix A for a complete installation guide.
This system can be equipped with a warning lamp and the Door Interlock

Switch, activated when the X-ray is energized.
The warning lamp and Door Interlock Switch are not included with the equipment.

The warning lamp and the Door Interlock Switch must be installed by a qualified

technician.
2.8

Installing the Emergency Stop Switch

Refer to Appendix B for a complete installation guide.
Install the Emergency Stop Switch along with the main power cable in the central

distribution panel.
Install this switch so that it is within easy reach of the operator but cannot be

accidentally pressed.
The switch must be a fool-proof model.

24
vatech A9 (Model:PHT-30CSS)
Installation Manual