Setting Up The User-Specific Information - Vatech PHT-30CSS Installation Manual

9.5

Setting up the User-specific Information

9.5.1 Running the Image Viewer
1. Run the image viewer. On your desktop, double-click the EzDent-i icon. The
EzDent-i's main window is displayed as follows.
vatech A9 (Model: PHT-30CSS)
See the corresponding section for setup instructions, based
on the viewer program (EzDent-i (SDK)) installed on the PC.
• EzDent- i: Refer to Section 9.5.2 when the EzDent-i is
installed.
This program must be run in administrator mode.
Installation Manual
9. Installing Software
119