Table of Contents
Advertisement
9. Installing Software
Selecting an Announcement Mode: Music or Beep (Optional)
If selecting an announcement between music and beep is necessary, perform the
following procedures.
Command specifications:
XXXX
0000
0001
0002
(Default)
1.
Send the command by the command specification, as specified in the table above.
Here are some examples.
Default mode: 0002(beep) for each imaging mode.
< When the same Music Announcement is desired for CT and PANO imaging
modality >
Enter the command [SPM_MPOP_0001] in the command field.
< When the same Beep Announcement is desired for CT and PANO imaging
modality >
Enter the command [SPM_MPOP_0002] in the command field.
130
Command format: [SPM_MPOP_XXXX]
Imaging Modes
CT/PANO
CT/PANO
CT/PANO
vatech A9 (Model:PHT-30CSS)
Announcement
Mode
Music
Different for each mode
Music
Beep
Division
Same for each mode
Same for each mode
Installation Manual
Advertisement
Table of Contents
Need help?
Do you have a question about the PHT-30CSS and is the answer not in the manual?
Questions and answers