Safety Instructions; General Safety Guidelines - Vatech EzRay Air Portable VEX-P250 User Manual

2.

Safety Instructions

2.1

General Safety Guidelines

Mode of operation: Continuous operation with cyclic loading 60 times the

exposure time wait before the next exposure can begin.
This equipment is designed and manufactured to ensure maximum safety of

operation. Operate and maintain it in strict compliance with the safety precautions
and operating instructions contained in this manual.
Only a legally qualified person, i.e., a radiographer, diagnostic radiographers,

medical radiation technologists or healthcare professionals who specialize in the
imaging of human anatomy for the diagnosis and treatment of pathology is
allowed to operate this equipment in a controlled environment.
Observe all local fire regulations. Always keep a fire extinguisher near the

equipment.
The equipment must be installed, maintained, and serviced by qualified service

personnel according to the procedures and preventive maintenance schedules.
Users can perform an only battery replacement.
Ensure that the on/off switch is set to off when the equipment is not in use.

Always disconnect the power supply before cleaning the equipment.

DO NOT keep the equipment or its parts in a humid place or a liquid substance.

Avoid placing the equipment near chemical storage and gas-filled storage

facilities.
The backscatter shield is provided as an optional item. If it is damaged or

defective, contact your Service Representative for replacement.
The backscatter shield (option) protects users from backscatter radiation that they

might be exposed during X-ray exposure. Operating the equipment with a
backscatter shield can expose you to less radiation when operating without a
backscatter shield.
EzRay Air Portable (Model: VEX-P250) User Manual
2. Safety Instructions
9