Plain Continuous Stock - Intermec EasyCoder PF8 User Manual

Plain Continuous Stock

PF8d/PF8t Printer User's Guide
The PF8 printers can use continuous stock without any detection
slots or black marks. The printer must be set for continuous stock
by using the ESim Q command. For more information, see the
ESim for the PC4 and PF8 Printer Programmer's Reference Manual
(P/N 937-011-xxx).
The length of each copy is decided by the size of the print image
and any additional media feed is decided by the Q command.
Continuous stock cannot be used in the Auto-Sensing mode.
Tag or strip width (a)
a
CONTINUOUS STRIP
Chapter B — Media Specifications
Maximum: 116.0 mm (4.57 in)
Minimum: 25.0 mm (1.00 in)
47