►
Install the cockpit app only on the operating systems listed in the section "System require
ments" (see Page 20). The tested devices are listed in this section as well.
6 Scope of Delivery and Accessories
Scope of Delivery
•
1 pc. 3B5-X3=ST Genium X3 - Bionic Pros
thetic System (with threaded connector) or
•
1 pc. 3B5-X3 Genium X3 - Bionic Prosthet
ic System (with pyramid connector)
•
1 pc. 2R19 AXON tube adapter
•
1 pc. 757L16* power supply
•
1 pc. 4E60* inductive charger
•
1 pc. 4X350-X3 remote control
•
1 pc. wrist band for 4X350-X3 remote con
trol: 4X194
Accessories
The following components are not included in the scope of delivery and may be ordered separ
ately:
•
3B5 4X900 protector
7 Charging the battery
The following points must be observed when charging the battery:
•
With average use, the capacity of the fully charged battery is sufficient for about 5 days.
•
We recommend charging the product overnight when used on a daily basis.
•
When used daily, the complete charging unit (power supply – battery charger) may remain
plugged into the wall socket.
•
The battery should be charged for at least 3 hours prior to initial use.
•
Use the 757L16* power supply and 4E60* battery charger to charge the battery.
•
Note the permissible temperature range for charging the battery (see Page 48).
•
The distance between the battery charger and the receiver on the product must not exceed
2 mm.
7.1 Connecting the power supply and battery charger
1
1) Slide the country-specific plug adapter onto the power supply until it locks into place (see
fig. 1).
•
1 pc. cosmetic case for battery charger and
power supply
•
1 pc. 646C107 Bluetooth PIN card
•
1
647F408
•
1 pc. card holder for prosthesis passport
•
1 pc. 646D564, 646D564=1 instructions for
use (user)
•
Android app "Cockpit 4X441-Andr=V*" for
download
http://www.ottobock-group.com/cock
pitapp
•
3B5 4X193-1 protector
2
pc.
3B5-X3
prosthesis
from
3
passport:
the
website:
Ottobock | 17