Foreword; Product Description; Design; Function - Otto Bock Genium X3 Instructions For Use Manual

2 Foreword

INFORMATION
Last update: 2015-09-28
► Please read this document carefully before using the product.
► Follow the safety instructions to avoid injuries and damage to the product.
Receive instruction in the correct and safe use of the product by qualified personnel.
►
► Please contact the qualified personnel if you have questions about the product (e.g. regard­
ing the start-up, use, maintenance, unexpected operating behaviour or circumstances).
Contact information can be found on the back page.
► Please keep this document in a safe place.
The product "Genium X3 - Bionic Prosthetic System" is called the product/prosthesis/knee
joint/component in the following.
These instructions for use provide you with important information on the use, adaptation and
handling of the product.
Only put the product into use in accordance with the information contained in the accompanying
documents supplied.

3 Product description

3.1 Design

The product consists of the following components:

3.2 Function

This product features microprocessor control of the stance and swing phase.
The microprocessor uses the measurements of an integrated sensor system as a basis to control
a hydraulic unit that influences the damping behaviour of the product.
1. Proximal pyramid adapter
2. Optional flexion stops
1
3. Battery
4. Hydraulic unit
2
5. LED (blue) as indicator for the Bluetooth
connection
6. Receiver of the inductive charging unit
3
7. Distal tube clamp screws (covered by pro­
tector)
8. Connecting cable for tube adapter
4
5
6
7
8
Ottobock | 7