Suspension; Control Unit Accessories; Attendant Control; Vr2 Attendant Control - Otto Bock 490E75 1 C Series Instructions For Use Manual

7.14 Suspension

73

7.15 Control unit accessories

7.15.1 Attendant control

7.15.1.1 VR2 attendant control

The power wheelchair has been equipped with a separate control panel for attendant operation. The separate con­
trol panel is height-adjustable and removable.
Functional overview
The attendant uses the attendant control to operate the driving function and the power seat functions.
The module is connected in conjunction with the control panel or as a separate input device.
74
Joystick
The attendant uses the joystick to control the speed and driving direction. When a seat option is activated, the joy­
stick operates this seat option.
[Activate/deactivate attendant control] button
The attendant uses this button to assume the control functions from the control panel or to return them to the con­
trol panel. The current state is shown by an LED indicator.
[Attendant control active] LED display
The green LED lights up when the attendant control is activated and the power wheelchair control panel is deactiv­
ated.
[Primary control active] LED display
The red LED lights up when the attendant control is deactivated and the power wheelchair control panel is activ­
ated.
[Select additional power function] button
Pressing this button selects seat function 1, then seat function 2. The selected seat function is indicated by the
LEDs.
490E75=1_C
This power wheelchair has drive wheel suspension as
standard equipment. The suspension is located to the
left and right of the battery case at the drive unit.
1 Joystick
2 [Activate/deactivate attendant control] button
3 [Attendant control active] LED display (green
LED display)
4 [Primary control active] LED display (red LED
display)
5 [Select additional power function] button
6 [Seat function 1] LED display
7 [Seat function 2] LED display
8 [Select speed level] button
9 [Selected speed level] LED display
Use
85