Side Effects; Further Information; Nameplate And Warning Labels - Otto Bock Avantgarde 4 Instructions For Use Manual

Hide thumbs Also See for Avantgarde 4:
Table of Contents

Advertisement

CAUTION
Uncontrolled driving behaviour, unexpected sounds or odours
Falling, tipping, collision with persons or nearby objects due to defects
► If any faults, defects or other hazards that can lead to personal injury are detected, the product must be taken
out of service immediately. This includes uncontrolled movements as well as sounds that are unexpected or
previously not noted or odours that deviate significantly from the state of the product at the time of delivery.
► Contact the qualified personnel.
NOTICE
Use under incorrect environmental conditions
Damage to product due to corrosion or abrasion
► Do not use the product in salt water.
► Make sure that the wheel bearings are not damaged by sand or other particles.

4.3 Side effects

The following side effects may occur during use of the product:
Neck, muscle and joint pain
Circulatory disorders, risk of pressure sores
Contact a doctor or therapist in case of problems.

4.4 Further information

INFORMATION
The serial number required for enquiries and orders can be found on the nameplate. For explanations of the
nameplate, see the section "Nameplate" (Nameplate).
INFORMATION
Even in the event of compliance with all applicable guidelines and standards, alarm systems (e.g. in department
stores) may respond to your product. Should this happen, remove your product from the area where the alarm
was triggered.

4.5 Nameplate and warning labels

The nameplates are found on the crossbrace.
Label
1)
 YYYY = year of manufacture; WW = week of manufacture; PP = production site; XXXX = sequential production
number
2)
 YYYY = year of manufacture; MM = month of manufacture; DD = day of manufacture
3)
 UDI-PI to GS1 standard; UDI = Unique Device Identifier, PI = Product Identifier
4)
 UDI-DI to GS1 standard; UDI = Unique Device Identifier, DI = Device Identifier
Avantgarde 4
A Manufacturer's product name
B CE marking
C Maximum load (see section "Technical data")
D Manufacturer information/address
1)
E Serial number
2)
F Manufacturing date
G Symbol for medical device
H WARNING! Read the instructions for use before using the
product.
Observe
(e.g. warnings, precautions).
I
Manufacturer's reference number for the product variant
3),1)
J
Serial number (PI)
K Global Trade Item Number (DI)
Meaning
important
safety-related
4)
Safety
information
13

Advertisement

Table of Contents
loading

Table of Contents