Add Aggregated Policer Statistics - Cisco ESW 500 Administration Manual

Configuring Quality of Service
Managing QoS Statistics
STEP 3
STEP 4
ESW 500 Series Switches Administration Guide
Add Policer Statistics Page
The
•
Interface — Select either the Port or EtherChannel radio button to select the
interface.
•
Policy Name — Select the policy Name from the pull-down list.
•
Class Map Name — Select the Class Map Name from the pull-down list.
Define the relevant fields.
Click Apply. The Policer Statistics is defined, and the device is updated.

Add Aggregated Policer Statistics

Aggregated Policer Statistics Page
The
of-profile packets that are received per aggregate policer name.
To add Aggregated Policer Statistics:
contains the following fields:
indicates the amount of in-profile and out-
12
293