Defining Trap Management; Defining Trap Settings - Cisco ESW 500 Administration Manual

Configuring SNMP

Defining Trap Management

STEP 3
STEP 4
Defining Trap Management
ESW 500 Series Switches Administration Guide
•
Community String — Defines the password used to authenticate the
management station to the device.
Configure either the Basic Mode or the Advanced Mode.
•
Basic — Enables SNMP Basic mode for a selected community and contains the
following fields:
•
Access Mode — Defines the access rights of the community. The possible
field values are:
-
Read Only
changes cannot be made to the community.
-
Read Write
made to the device configuration, but not to the community.
-
SNMP Admin
well as permissions to modify the community.
•
View Name — Contains a list of user-defined SNMP views.
•
Advanced — Enables SNMP Advanced mode for a selected community and
contains the following fields:
-
Group Name — Defines advanced SNMP communities group names.
Define the relevant fields.
Click Apply. The SNMP Community settings are defined, and the device is
updated.
This section contains the following topics:
•

Defining Trap Settings

•
Configuring Station Management
•
Defining SNMP Filter Settings
Defining Trap Settings
Trap Settings Page
The
parameters.
— Management access is restricted to read-only, and
— Management access is read-write and changes can be
— User has access to all device configuration options, as
contains parameters for defining SNMP notification
13
348