Resetting The Device - Cisco ESW 500 Administration Manual

Managing Device Information

Resetting the Device

Resetting the Device
STEP 1
ESW 500 Series Switches Administration Guide
-
Not Present
Restart / Reset
The page enables the device to be reset from a remote location.
Save all changes to the Running Configuration file before resetting the device. This
prevents the current device configuration from being lost.To open the
Reset Page
:
Click Monitor & Device Properties > System Management > Restart / Reset. The
Restart / Reset Page
Restart / Reset Page
The following resets the device:
•
Reset / Reboot — Resets the device. Ensure the device configuration has been
saved.
•
Restore Default — The device is restored to the factory default configuration.
-- Indicates the fan is not present.
opens:
2
Restart /
53