Configuring Smart Ports For Printers - Cisco ESW 500 Administration Manual

Managing Smart Ports

Configuring Smart ports for Printers

STEP 6
STEP 7
STEP 8
Configuring Smart ports for Printers
STEP 1
STEP 2
STEP 3
STEP 4
ESW 500 Series Switches Administration Guide
Forwarding state when the port link is up. Fast Link optimizes the STP protocol
convergence. STP convergence can take 30-60 seconds in large networks.
•
Spanning Tree BPDU Guard — Indicates if BPDU Guard is enabled on the
interface.
•
QoS Policy — Indicates that the default QoS policy settings are applied to the
port. The Default policy is voice-map.
•
Macro Description— Indicates the type of device connected to the port. For
servers, this field is always
Select a VLAN in the
Click Apply. The Server port settings are saved, and the device is updated.
Smart ports Setting
Click OK. The
Smart ports Setting Page
The
between the device and a printer.
To configure ports using the printer:
Open the Small Business Pro web application. The web application automatically
Ports are enabled for the Smart Port wizards by default. However, the
opens to the
initial configuration of the Smart Ports wizards can only occur if the Startup
Configuration file is empty.
Click Smart ports Wizard under Ports on the
wizards by default.
Select a port or range of ports.
Printer Assign Role dropdown
Select in the
Server.
VLAN ID
dropdown box.
page opens.
allows network administrators to define settings
Ports are enabled for the Smart Port
box.
3
80