Chapter 8: Configuring Ip Information; Ip Addressing - Cisco ESW 500 Administration Manual

Configuring IP Information

IP Addressing

Configuring IP Information
IP Addressing
ESW 500 Series Switches Administration Guide
The IP address and default gateway can be either dynamically or statically
configured. In Layer 2, a static IP address is configured on the IPv4 Interface Page.
The Management VLAN is set to VLAN 1 by default, but can be modified.
This section provides information for defining device IP addresses, and includes
the following topics:
•
IP Addressing
•
Defining DHCP Relay
•
Defining DHCP Relay Interfaces
•
ARP
•
Domain Name System
The IP address and default gateway can be either dynamically or statically
configured. In Layer 2, a static IP address is configured on the
The Management VLAN is set to VLAN 1 by default, but can be modified.
IPv4 Interface Page
The
forwarded to the default IP when frames are sent to a remote network. The
configured IP address must belong to the same IP address subnet of one of the IP
interfaces.
contains fields for assigning IPv4 addresses. Packets are
8
IPv4 Interface Page
.
230