Cisco ESW 500 Administration Manual page 432

Aggregating Ports
Configuring LACP
STEP 1
STEP 2
STEP 3
ESW 500 Series Switches Administration Guide
Click VLAN & Port Settings > Port Management > LACP. The
LACP Page
LACP Page
The contains fields for configuring LACP EtherChannels.
•
LACP System Priority — Indicates the global LACP priority value. The possible
range is 1- 65535. The default value is 1.
•
Port — Defines the port number to which timeout and priority values are
assigned.
•
Port Priority — Defines the LACP priority value for the port. The field range is 1-
65535.
•
LACP Timeout — Administrative LACP timeout. The possible field values are:
-
Short — Defines a short timeout value.
-
Long
— Defines a long timeout value. This is the default value.
Define the relevant fields.
Click Apply. The LACP EtherChannels are defined, and the device is updated.
18
LACP Page
opens:
421