Tcam Resources - Cisco ESW 500 Administration Manual

Configuring Device Security
Defining DHCP Snooping
STEP 1
ESW 500 Series Switches Administration Guide
Click Security > DHCP Snooping > IP Source Guard > Binding Database. The
Source Guard Binding Database Page
IP Source Guard Binding Database Page
IP Source Guard Binding Database Page
The

TCAM Resources

•
Insert Inactive — The IP Source Guard Database uses the TCAM resources for
managing the database. If TCAM resources are not available, IP source guard
addresses may become inactive. The switch can try to activate inactive
addresses in various time intervals:
-
Retry Frequency
interval. The possible values are 10 - 600 seconds.
-
Never
— Never try to activate inactive addresses.
-
Retry Now
opens:
— Try to activate inactive addresses at a specified
— Try to activate inactive addresses immediately
contains the following fields:
5
IP
189