Modifying Snmp Users - Cisco ESW 500 Administration Manual

Configuring SNMP
Configuring SNMP Security
ESW 500 Series Switches Administration Guide
-
SHA Password
using the HMAC-SHA-96 authentication method.
-
None
— No user authentication is used.
•
Password — Define the local user password. Local user passwords can
contain up to 159 characters. This field is available if the Authentication Method
is a password.
•
Authentication Key — Defines the HMAC-MD5-96 or HMAC-SHA-96
authentication level. The authentication and privacy keys are entered to define
the authentication key. If HMAC-MD5-96 is selected then16 bytes are required
and if HMAC-SHA-96 then 20 bits are required. This field is available if the
Authentication Method is a key.
•
Privacy Key — Defines the Privacy Key (LSB). If only authentication is required,
16\20 bytes are defined. If both privacy and authentication are required, 36\40
bytes are defined. Each byte in hexadecimal character strings is two
hexadecimal digits. This field is available if the Authentication Method is a key.

Modifying SNMP Users

The Edit SNMP User Page provides information for assigning SNMP access
control privileges to SNMP groups.
Edit SNMP User Page
The Edit SNMP User Page contains the following fields.
•
User Name — Displays the user-defined group to which access control rules
are applied. Provides a user-defined local user list.
•
Engine ID — Indicates the local device engine ID.
— Users should enter a password that is encrypted
13
339